|
|
|
|
|
|
|
|
|
|
|
USA SMT stencil cleaning machine -- ErgoSonic
|
|
| Model No.︰ | ErgoSonic |
| Brand Name︰ | SMART SONIC |
| Country of Origin︰ | United States |
| Minimum Order︰ | 1 pc |
|
|
|
|
|
|
|
ErgoSonicTM
Automatic / Closed-loop
Stencil & Pallet Cleaner
The first ergonomically designed front-loading ultrasonic stencil cleaner
Front-loading eliminates lifting stencils and baskets over tall wash tanks.
Sealed process chamber prevents odors and user contact with wash solutions common with open-tank systems
Ergonomic loading height eliminates steps and loading platforms
Full automation allows unattended operation
Eliminates stencil damage due to soaking
Programmable cleaning cycles for multiple applications
No external lifts or moving parts
Closed-loop technology is compatible with many cleaning chemistries – no drain required
Energy efficient ambient cleaning
Optional top-mounted drying rack or automatic drying
Easy maintenance
Stainless steel construction
Clean solder paste, SMD adhesives or post solder flux residue from stencils, screens, misprinted PCBs, pallets and other tooling at the press of a single button.
The ErgoSonic automatic stencil and pallet cleaner combines the cleaning efficiency of ultrasonic technology with the convenience of front-loading! The unique design of the ErgoSonic Stencil Cleaner facilitates front-loading of the stencil at a safe and comfortable height and does not require a stencil basket. The ErgoSonic is fully automatic, programmable, compatible with many closed-looped cleaning chemistries and can be completely self-contained - not requiring a drain. The operator simply places the stencil into an empty process chamber, closes the door and presses the start button. The ultrasonic wash, rinse and optional dry cycle are completed in just minutes. The user never comes in contact with cleaning chemistries, vapors or contaminated waste streams.
Other top-loading stencil cleaners require the operator to lift the stencil and stencil basket over tall wash tanks causing a conflict with OSHA safety regulations. Unconventional lifting, awkward loading platforms, heavy stencil baskets and drain disposal can be completely eliminated by the ErgoSonic Stencil Cleaner.
Like all Smart Sonic Stencil Cleaners, when using 440-R SMT Detergent, the ErgoSonic is guaranteed to clean any type of solder paste from any fine-pitched stencil.
ErgoSonicTM
Automatic Stencil & Pallet Cleaner
Shown with optional top-mounted drying rack
Typical Cleaning Cycle:
1. Front-load stencil / pallet into process chamber and press start button
2. Wash solution is pumped into process chamber for ultrasonic wash
3. Wash solution is filtered while transferred to holding reservoir
4. Clean solution or pressurized water enters the process chamber for spray and/or ultrasonic rinse
5. Rinse solution is filtered while transferred to holding reservoir or sent to drain/evaporator
Optional low-temperature drying cycle
Process chamber is exhausted to remove odors and vapors*
Stencil / pallet is removed and placed on optional drying rack or inventoried |
|
|
|
| specifications︰ | Specifications: ErgoSonic
Overall Dimensions: 35.5" x 59" x 43"H
Wash Tank Dimensions 5.5" x 30" x 31"D
Wash Tank Capacity 21 Gallons (79.5 liters)
Maximum Frame Size 29" x 29" with one cycle
Utilities Required
Ambient Wash Tank 220- 240 Volt, 1 Phase, 8 Amps
Heated Wash Tank 220 – 240 Volt, 3 Phase, 18 Amps
*Exhaust blower by others
|
| Advantages︰ | Clean solder paste, SMD adhesives or post solder flux residue from stencils, screens, misprinted PCBs, pallets and other tooling at the press of a single button.
The ErgoSonic automatic stencil and pallet cleaner combines the cleaning efficiency of ultrasonic technology with the convenience of front-loading! The unique design of the ErgoSonic Stencil Cleaner facilitates front-loading of the stencil at a safe and comfortable height and does not require a stencil basket. The ErgoSonic is fully automatic, programmable, compatible with many closed-looped cleaning chemistries and can be completely self-contained - not requiring a drain. The operator simply places the stencil into an empty process chamber, closes the door and presses the start button. The ultrasonic wash, rinse and optional dry cycle are completed in just minutes. The user never comes in contact with cleaning chemistries, vapors or contaminated waste streams.
Other top-loading stencil cleaners require the operator to lift the stencil and stencil basket over tall wash tanks causing a conflict with OSHA safety regulations. Unconventional lifting, awkward loading platforms, heavy stencil baskets and drain disposal can be completely eliminated by the ErgoSonic Stencil Cleaner.
Like all Smart Sonic Stencil Cleaners, when using 440-R SMT Detergent, the ErgoSonic is guaranteed to clean any type of solder paste from any fine-pitched stencil.
|
| Export Markets︰ | China SMT factory |
| Pricing︰ | Fax quotation |
| Payment Details︰ | 50 % T.T. advance deposit, balance COD |
| Min Order︰ | 1 set |
| Ship Date︰ | 3 months |
| AQMD︰ | yes |
| ETV︰ | yes |
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
